Fuser film sleeve manufacturers said that many people will be more curious about whether the broken fixing film has something to do with printing ghosting? This will have a certain relationship! Fuser film sleeve manufacturers tell you because the fixing film is part of the heating assembly! The Fuser film sleeve manufacturer tells you that the ceramic sheet generates heat after being energized, and transfers the heat to the heating film. When the paper with toner attached to the surface passes through the heating assembly, the heating film will transfer the heat to the paper, melt the toner particles and dissolve them. Press the melted toner into the paper fibers with the pressure of the up and down sticks! This forms the file we see!

The Fuser film sleeve manufacturer tells you that during the customer's use, if a poor quality toner is used or a poor quality fixing film is replaced, the melted toner particles will often adhere to the heating film and form a shape on the heating film. This layer of toner cover will adhere to some molten toner during the heating process. The Fuser film sleeve manufacturer tells you that after one cycle of rotation, the next cycle or the next few It takes a few cycles to fix these toners to the paper, so the ghost images we usually see are formed!
The Fuser film sleeve manufacturer tells you that ghosting is related to several factors, the fixing film is one aspect, the toner is another aspect, and the moisture level of the paper is also related to a certain extent.