Fuser film sleeve manufacturers tell you that the fuser heating roller (upper roller) and pressure roller (lower roller) are always in contact with toner and paper, which will inevitably be contaminated with toner and paper dust, and will be in these toner and paper over time. The powder will melt and stick on the upper and lower fuser rollers to form toner agglomerates, resulting in poor print image quality and damage to the fuser heating shaft and pressure shaft. Fuser film sleeve manufacturers tell you that there is generally a cleaning system on the fuser assembly for cleaning to extend the fuser life.

The fixing cleaning mechanism mainly has the following designs
1. Self-cleaning design, the Fuser film sleeve manufacturer tells you to clean through the fixing heat roller and pressure roller, relying on its material characteristics to clean, there is no separate cleaning mechanism.
2. The cleaning felt type cleaning design, the Fuser film sleeve manufacturer tells you to install a cleaning felt on the fixing assembly for cleaning.
3. Roller cleaning design, a driven roller is set in the fixing assembly. The Fuser film sleeve manufacturer tells you that the roller is made of a material that can adhere toner toner, and the toner and paper powder on the fixing heat roller and pressure roller are adhered to it. , so as to achieve the effect of cleaning and fixing.
4. The Fuser film sleeve manufacturer tells you the design of the cleaning belt, and the cleaning silicone oil paper transmission structure is independently set in the fixing assembly, and the fixing is cleaned by the silicone oil paper.
5. The Fuser film sleeve manufacturer tells you the design of the composite fixing cleaning mechanism, and two or more cleaning methods are used for fixing cleaning in the fixing mechanism.