search
search
cancel
language
中国
韩国
韩国
韩国
韩国
韩国
News Center
/
/
/
Separation roller manufacturers take you to understand why to replace the fixing roller with a fixing film

NEWS

CONTACT US

Balson Technology Co.,Ltd

  • Add:Room 8318, Wangcheng Building, Longguan East Road, Longhua New District, Shenzhen
  • Whatsapp Wechat: +86 13360528856

  • Skype:balson8_chips

  • Email:balson8@toner-chip.com

  • Url:www.toner-chip.com

     

     

Separation roller manufacturers take you to understand why to replace the fixing roller with a fixing film

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-03-01 16:55
  • Views:

Separation roller manufacturers take you to understand why to replace the fixing roller with a fixing film

(Summary description)Separation roller manufacturers tell you that the printer is generally powered on all day, especially the multi-function machine is in working condition 24 hours a day; if the fixing roller is used, the thermal inertia is large, the power consumption is large, and the heat in the machine is not easy to dissipate.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-03-01 16:55
  • Views:
Information

Separation roller manufacturers tell you that the printer is generally powered on all day, especially the multi-function machine is in working condition 24 hours a day; if the fixing roller is used, the thermal inertia is large, the power consumption is large, and the heat in the machine is not easy to dissipate. Separation roller manufacturers tell you that in order to reduce the preheating standby time and achieve zero start-up, an extremely thin film is used to replace the fixing roller. The fixing film is multi-layered, generally divided into three layers: a forming layer, a primer coating, and a surface coating; the surface of the fixing film is non-sticky, and can conduct electricity and heat. Separation roller manufacturers tell you that the fixing film is a vulnerable part on the fixing device, and basically it may be accidentally damaged or worn after every tens of thousands of sheets are printed. A good fixing film should have the right stiffness.

Separation roller on sales
The manufacturer of the separation roller tells you that the fixing film with insufficient stiffness will easily make a "crackle" noise when the fixing film is rotated on the machine, while the fixing film with good stiffness will make a very small "sand" sound. Separation roller manufacturers tell you that the fixing film with too low stiffness is easy to wrinkle during use, and it will appear uneven when printing black images. However, if the stiffness of the fixing film is too high, it is easy to cause difficulty in heat conduction, and the fixing firmness decreases.
The difference between the fixing film and the fixing roller:
Separation roller manufacturers tell you that the inside of the fixing roller is heated by one or more heating lamps (halogen lamps), so that the characters are fixed on the paper. Separation roller manufacturers tell you that there is a ceramic piece inside the fixing film, the ceramic piece is heated by electricity and then fixed to the paper through the fixing film. Separation roller manufacturers tell you that the difference between the two is that the fuser roller consumes a lot of electricity, the preheating is slow, the preheating time is long, but the service life is long. strong, resulting in a short lifespan.

Keyword:

  • ABOUT US
BalsonTechnolog Co.,Ltd

Is a professional manufacturer and supplier of compatible toner cartridge

Copyright © 2020 Balson .粤ICP备2021044812号

  • NAVIGATION
  • CONTACT US

Tel:+86-0755-23062280-812                   
Fax:+86-0755-29494906                    
Whatsapp:+86-
13360528856
Email: julia@toner-chip.com 
Address:3F, 2Building,TangZheng industrial park,GuanLan
road 152,longhua New Dis,shenzhen 518110,China

Skype
service hotline
0755 83808240 0755 83808240
Service time:
8:00 - 18:00
Skype:
Customer message