The manufacturer of the upper fuser roller tells you that during the copying process of the copier, you will encounter the paper jam in the fusing place of the copier. Many people do not understand why such a problem occurs. How to solve the paper jam in the fusing place? Let's follow the Upper fuser roller manufacturer to learn about it.

Fault reasons and troubleshooting methods:
1. Often the paper is jammed in the fusing part or the paper outlet.
Causes of failure and troubleshooting methods: (1) Whether the pressure of the fixing roller is too high; (2) Whether the fixing roller transmission gear is well fixed; (3) Whether there is too much silicone oil on the fixing roller (too much silicone oil makes the paper easy to roll onto the roller); (4) Whether the fixing roller is dirty (if it is dirty, the paper will be rolled onto the roller); (5) The manufacturer of the Upper fuser roller tells you whether the separation claw of the fixing roller is aging and deformed; (6) The paper discharge port detection switch or sensor Is it sensitive.
 2. Paper jam in the fuser unit.
Fault reasons and troubleshooting methods: (1) The manufacturer of the Upper fuser roller tells you that there is a foreign body in the fuser. Remove the foreign matter in the fuser; (2) The spring conveying wire falls off or is damaged. Overhaul and replace the steel wire; 3) The pressure at both ends of the heat roller is uneven. Adjust the pressure at both ends of the roller.
The manufacturer of the upper fuser roller believes that, through the above analysis, the paper jam of the copier at the fusing place will no longer be a problem. We can solve the above problems by ourselves without having to find maintenance personnel, which improves our work efficiency to a certain extent.