The manufacturer of the Upper fuser roller tells you that many people do not understand how the fuser film of the printer is damaged. Let’s briefly understand VBA below.

1. It is caused by normal wear after printing a large amount, and after adding powder, the film sticks to powder.
2. When foreign matter falls into the printing component and causes damage and jamming, use sharp objects to pick up paper (use tweezers, pens, pliers, knives, or strong pull, etc.)
3. The manufacturer of the Upper fuser roller tells you that the uneven pressure of the fixing component causes the film to rotate in one direction and crack (the most common is caused by the wear of the lower fuser roller sleeve) 4. There is a crack at one end of the fixing film and it is easy to tear
4. The manufacturer of the Upper fuser roller tells you that there is a lack of oil in the fuser film, resulting in poor rotation and so on.
5. There is a crack at one end of the fixing film.
The above is the reason why the fuser film of the printer is damaged that the manufacturer of the Upper fuser roller has brought you to understand. I hope it will be helpful to you.