search
search
cancel
language
中国
韩国
韩国
韩国
韩国
韩国
News Center
/
/
/
Common faults of printer Fuser gear products

NEWS

CONTACT US

Balson Technology Co.,Ltd

  • Add:Room 8318, Wangcheng Building, Longguan East Road, Longhua New District, Shenzhen
  • Whatsapp Wechat: +86 13360528856

  • Skype:balson8_chips

  • Email:balson8@toner-chip.com

  • Url:www.toner-chip.com

     

     

Common faults of printer Fuser gear products

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2021-09-28 16:33
  • Views:

Common faults of printer Fuser gear products

(Summary description)There are many common problems with printer Fuser gear products. Let me take a look at them in detail below.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2021-09-28 16:33
  • Views:
Information

There are many common problems with printer Fuser gear products. Let me take a look at them in detail below.
The common faults of the printer fixture are as follows:
1. The printer's fixing temperature control fails, and the machine alarms. The manufacturer of Fuser gear tells you that the machine detects the fixing temperature in several points: self-checking, increasing the temperature of the fixing roller from room temperature to 125°C. During this process, the machine continuously reads the data sent by the thermistor. If the temperature does not reach the specified temperature within the specified time, the machine will issue an alarm. The manufacturer of Fuser gear tells you that this situation is related to the low heater efficiency (such as the aging of the heater lamp) and the abnormal temperature detection (there is dirt between the thermistor and the fuser roller). During the overhaul, the Fuser gear manufacturer tells you to focus on these two parts. During the printing process, if the thermistor detects an abnormal temperature (for example, the temperature of the fuser roller is higher than 220°C), the machine will also issue an alarm.

china Fuser gear supplier(s)
2. Paper jams often occur at the exit of the printer's fuser roller. The Fuser gear manufacturer tells you that there are many factors that cause this failure: high fixing temperature; unqualified paper; excessive pressure, etc. Some cases are also related to the wear of the separating claws. The thickness of the xerographic paper ensures that it will not be excessively bent even if it is heated during the normal fixing process, but the thin paper will be significantly deformed when encountering high temperatures, and it is easy to jam. In addition, due to careless use of tools during maintenance, burrs will be left in the paper path and cause paper jams.
3. The surface of the printer press roller is stained with toner, and the back of the paper is dirty. The manufacturer of Fuser gear tells you the reasons for this failure are as follows: toner leaks from the developing device and spills on the paper path, causing the back of the paper to be contaminated; toner sticks to the pressure roller.
4. Insufficient and excessive printer fixation. The manufacturer of Fuser gear tells you that this kind of failure is generally directly related to abnormal heater operation and inaccurate temperature detection.

Keyword:

  • ABOUT US
BalsonTechnolog Co.,Ltd

Is a professional manufacturer and supplier of compatible toner cartridge

Copyright © 2020 Balson .粤ICP备2021044812号

  • NAVIGATION
  • CONTACT US

Tel:+86-0755-23062280-812                   
Fax:+86-0755-29494906                    
Whatsapp:+86-
13360528856
Email: julia@toner-chip.com 
Address:3F, 2Building,TangZheng industrial park,GuanLan
road 152,longhua New Dis,shenzhen 518110,China

Skype
service hotline
0755 83808240 0755 83808240
Service time:
8:00 - 18:00
Skype:
Customer message