search
search
cancel
language
中国
韩国
韩国
韩国
韩国
韩国
News Center
/
/
/
Upper fuser roller manufacturers take you to understand the steps of replacing the fuser roller

NEWS

CONTACT US

Balson Technology Co.,Ltd

  • Add:Room 8318, Wangcheng Building, Longguan East Road, Longhua New District, Shenzhen
  • Whatsapp Wechat: +86 13360528856

  • Skype:balson8_chips

  • Email:balson8@toner-chip.com

  • Url:www.toner-chip.com

     

     

Upper fuser roller manufacturers take you to understand the steps of replacing the fuser roller

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-07-21 15:18
  • Views:

Upper fuser roller manufacturers take you to understand the steps of replacing the fuser roller

(Summary description)The manufacturer of the Upper fuser roller tells you that the fuser roller, commonly known as the heating roller, is one of the components of the fuser. Its main function is to put pressure on the fixing upper roller.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-07-21 15:18
  • Views:
Information

The manufacturer of the Upper fuser roller tells you that the fuser roller, commonly known as the heating roller, is one of the components of the fuser. Its main function is to put pressure on the fixing upper roller, and it has no drive itself. The manufacturer of the upper fuser roller tells you that the power of its rotation comes from the friction of the upper fuser roller. The rotation of the upper fuser roller and the upper fuser roller can fix the copy toner image through high temperature and send it to the output tray of the copier.

Wholesale Upper fuser roller factory
Steps to replace the fuser roller:
1. Remove the fixing assembly from the machine, remove the snap ring as shown below, and remove the cover:
2. The manufacturer of the Upper fuser roller tells you to remove the cover and then remove the separation claw assembly.
3. Unplug the sensor plug when removing the separation claw assembly.
4. Remove the back thermostat cover and remove the heating tube thermostat plug.
5. Remove the covers and heating tube brackets on both sides of the fuser.
6. Remove the thermal sensor.
7. Remove the upper cover of the fixing unit, and remove the wires behind it.
8. Remove the spring of the lower roller.
9. Remove the lamp, (Upper fuser roller manufacturer tells you to pay attention: the lamp is fragile, take it out gently).
10. Remove the gear bracket.
11. Remove the bearing of the heat roller, and then the heat roller can be removed.
12. Pay attention to cleaning the surface of the thermal sensor. If the machine is too dirty, the error code C3421 will be reported, or the heat roller will be scratched.
13. Reverse the operation to install the fixing assembly. The manufacturer of the Upper fuser roller tells you not to scratch the new heat roller when installing it. When installing the lower roller, make sure that the bearings on both sides are in the bracket, otherwise the uneven pressure will cause paper jams or paper pulls. 

Keyword:

  • ABOUT US
BalsonTechnolog Co.,Ltd

Is a professional manufacturer and supplier of compatible toner cartridge

Copyright © 2020 Balson .粤ICP备2021044812号

  • NAVIGATION
  • CONTACT US

Tel:+86-0755-23062280-812                   
Fax:+86-0755-29494906                    
Whatsapp:+86-
13360528856
Email: julia@toner-chip.com 
Address:3F, 2Building,TangZheng industrial park,GuanLan
road 152,longhua New Dis,shenzhen 518110,China

Skype
service hotline
0755 83808240 0755 83808240
Service time:
8:00 - 18:00
Skype:
Customer message