NEWS
CONTACT US
Balson Technology Co.,Ltd
- Add:Room 8318, Wangcheng Building, Longguan East Road, Longhua New District, Shenzhen
What is the role of Fuser thermistor
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2021-07-27 17:10
- Views:
What is the role of Fuser thermistor
(Summary description)The electronic components required in different products and equipment are different. For a special fuser, the most important electronic component is the Fuser thermistor. So what is the role of such Fuser thermistor?
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2021-07-27 17:10
- Views:
The electronic components required in different products and equipment are different. For a special fuser, the most important electronic component is the Fuser thermistor. So what is the role of such Fuser thermistor?
The application of Fuser thermistor is multi-layered, which means that it exists in many parts. The central thermistor is the main thermistor, which detects the temperature of the central part of the fixing roller, and controls the on and off of the fixing lamp; the side thermistor is the auxiliary thermistor, because the paper does not pass through the heat roller and the paper is not there. If it absorbs heat, both sides of the fuser roller may overheat. The sub-temperature thermistor can detect abnormal heat generation in this area due to overheating of the fixing roller. Therefore, the sub thermistor is not used for temperature control of the fixing roller, only monitoring the temperature of the fixing roller is abnormal.
The main function of Fuser thermistor is to adjust the fixing temperature. The thermistor is tightly attached to the fixing roller or ceramic heater. When its temperature changes, its resistance changes. The logic circuit controls the switch of the heating lamp to realize the adjustment and constant temperature of the fixing temperature. The thermistor used in laser printers basically has a negative temperature coefficient. That is, the higher the external temperature, the lower the resistance of the thermistor. When the lamp tube starts to heat up. The temperature of the heating roller gradually increases, and the resistance of the thermistor decreases. When the surface temperature of the heater reaches the rated temperature, the resistance of the thermistor also reaches the lowest value, and then the heater is controlled to stop heating through the logic control circuit. This is repeated to control the surface temperature of the heater to keep within the designed temperature range.
The role of Fuser thermistor should not be underestimated. Without the existence of this electronic component, the performance of the fuser cannot be guaranteed. And relatively speaking, the quality of Fuser thermistor determines the effect and service life of the fuser. Therefore, attention to quality selection is a crucial detail.
- ABOUT US
Is a professional manufacturer and supplier of compatible toner cartridge
Copyright © 2020 Balson .粤ICP备2021044812号
- NAVIGATION
- CONTACT US
Tel:+86-0755-23062280-812
Fax:+86-0755-29494906
Whatsapp:+86-13360528856
Email: julia@toner-chip.com
Address:3F, 2Building,TangZheng industrial park,GuanLan
road 152,longhua New Dis,shenzhen 518110,China